IM7206: Hi-speed USB to SATA Bridge with RFID Control  

The IM7206 is a single chip to integrate following functions:
  • a bridge between the USB host and the SATA device
  • RF decoder
  • Advanced Encryption Standard (AES) 128 bits de/encryption.
    It is can be apply an ordinary USB to SATA device enclosure with RFID authentication or an ordinary enclosure. The USB coheres the Mass Storage Class Bulk-only Transport Specification and the embedded command parser supports both ATA and ATAPI command set with LBA48 addressing capability. This chip is designed by 0.18um CMOS technology with 64 LQFP package (10x10mm) .


  • Compliance with Gen1i, and Gen1m of Serial ATA II electrical specification 1.0
  • Compliance with USB 2.0 (Hi-Speed USB) electrical specification
  • Compliance with USB mass storage class bulk-only transport specification
  • Support Advanced Encryption Standard (AES) 128 bits encryption function
  • Support SATA spread-spectrum transmitter
  • Support SATA II asynchronous signal recovery (Hot Plug) feature
  • Support 480Mbps High Speed (HS) and 12Mbps full speed USB operation
  • Support ATA/ATAPI LBA48 bit addressing mode
  • Support 12MHz external crystal
  • Support 125KHz RFID base band control
  • Single-power 3.3V power supply
  • 0.18um CMOS technology and 64 -pin LQFP ASSP package


    Security HD Enclosure

    Security & Privacy Statements

    Copyright (c) 2006 by INNMAX Corporation. All rights reserved.